PBMS2000 Battery enkawl dan System Main Controller .
- Battery string voltage, charge leh discharge current enfiah .
- Battery string SOC chhiar dan .
- Auto-balancing 1000 a ni.
- Battery sensor ID address a hman tur auto-sensing a awm bawk.
- Set point alarm (a chung lam limit / a hniam lam) .
- Data lakkhawmna .
- Build-in RS485 (Modbus-RTU) & Ethernet (Modbus-TCP emaw SNMP emaw) hmanga data uploading hnathawh dan.
- 3rd party system thlawp rawh.
- HMI hmanga local display .
- A hmanrua te:
1) Hall sensor leh cable: 0 ~ ±1000a inkar a awm a, 2M cable a awm bawk.
2) Inbiakpawhna cable: 5m a ni a, RJ11 port a awm bawk.
A rilru a buai em em a, a rilru a hah em em bawk a.
- 2V battery atan PBAT61-02, 6V battery atan PBAT61-06, 12V battery atan PBAT61-12 a awm bawk.
- Mimal battery voltage, a chhunga temperature (negative pole), impedance (ohmic value) enfiah
- Auto-balancing 1000 a ni.
7-inch normal HMI (a duh chuan) a ni.
- 7-inch touch-screen HMI hmanga entir leh hman theih a ni.
- Real-time data zawhna:
1) Mimal battery voltage, impedance, chhung lam temperature, SOC, SOH .
2) String voltage, charge leh discharge current, SOC, Balance degree .
- Alarm data zawhna:
1) Real-time alarm status leh a kaihhnawih alarm information (Faulty Battery ID,
Date/time, alarm awm chhan, inbiakpawhna dinhmun, etc.)
2) String battery tin alarm record 3000 a awm .
