PBMS9000 Battery enkawlna system main controller a ni.
- Standard 1 u design a ni a, a hmunhma pawh a nuam hle.
- Power tihtawp loh nan dual-source .
- Built-in web server a awm a, a hmuh theihin a lang thei bawk.
- Monitor Max. 6 strings battery, a vaiin battery 420 a awm
- Battery string current & voltage, ripple voltage & current, charge & discharge current, chhungril temperature, impedance, insulation resistance, ambient temperature & humidity, SOC leh SOH te teh rawh.
- SMS emaw email emaw hmanga alarm message
- MODBUS-TCP, MODBUS-RTU, SNMP leh IEC61850 protocol te chu a thlawp a ni.
- JSON format a data upload theihna tur MQTT support .
- RS485 port 1, Ethernet port 2 leh data upload theihna tur 1 4G antenna port 1 a awm bawk.
- 6 DI ports (digital input inzawm) a ni.
- 6 do ports (sound leh light alarm) .
PBMS-CM string current hmanga tehna sensor & hall sensor a ni.
- String pakhat hian PBMS-CM 1 a mamawh a, PBMS-CM tin hian hall sensor port 2 a mamawh a ni.
- Battery string charge leh discharge current, ripple current tehna
- Multi-pole battery-a string charge tehna leh discharge current leh ripple current chu flexiable module leh hall sensor hmanga teh a ni.
- A hmanrua te:
1) Hall sensor leh cable: 0~±1000A leh 2M cable hmanga siam theih a ni.
2) Inbiakpawhna cable : 5m a ni a, RJ45 port a awm bawk.
PBAT51-02/PBAT51-12 Battery Cell Sensor hmanga siam a ni.
- PBAT51-02 hi 2V battery atan a ni a, PBAT51-12 hi 12V battery tan a ni.
- Mimal battery voltage, a chhunga temperature (negative pole) enfiah, impedance (Ohmic value)
- Auto-balancing 1000 a ni.
- 3M adhesive tape hmanga dah a ni.
- A hmanrua te:
1) Battery tehna cable: 30cm .
2) Inbiakpawhna cable: 40cm & 70cm a ni a, RJ11 port (a duh chuan) a awm bawk.
